Conference Calling - Motorola SELECT 6000 Manual

Conference Calling

With conference calling, you can join up to five other parties to
create a group call.
Conference calling is a network feature. Please contact your
A
service provider for availability information.
Setting up a Conference Call
To initiate a conference call, simply place or receive a call as you
would normally. Once the call is established, press M and scroll
is displayed. Press O to select.
until
Make New Call
You will then be prompted for the number of the next party. You
can either dial directly from the keypad or recall a number from
your Phone Book via the Quick Access menu.
The original call will automatically be placed on hold while you
make the new call. Once the new call is established, you can join
the calls together by pressing M and selecting 'Conference Call.'
You may also add incoming calls by answering Call Waiting and
selecting 'Conference Call' as described above.
Simply repeat these steps to include additional calls.
22 Making and Receiving Phone Calls
Separating Individual Calls
If you need to speak with an individual caller privately, you can
isolate one call from the conference call.
In order to separate a call from the group, there must not be
A
any calls already on hold.
To isolate the call, press M and select 'Split Call.' You will then
be able to scroll through the phone numbers (and names, if
available) of all the members of the conference calls to separate
out the call. Once you find the desired party, press O to
separate out that call.
To re-join the group, select 'Conference Call' again.
Ending the Call
Close the keypad cover to end all calls simultaneously.
Press M then scroll to either 'End Active Call' to disconnect your
live call or 'End Held Call' to disconnect either an individual or the
remaining group on hold.