Receiving A Phone Call; Answering A Phone Call; Ending A Phone Call - Motorola SELECT 2000 Manual

Receiving a Phone Call

To receive a phone call:
• Your phone must be switched on and unlocked.
• You must be in an area with PCS service.
• Your Call Forwarding and Call Barring settings should not be
set to forward or bar incoming calls.
When your phone receives a call, it will ring and the display will
show Answer? If you have Caller Line Identification service, the
caller's number will be displayed.
As a CLI subscriber, if a phone number match is found in your
A
Phone Book or SIM memory, the phone will display the name
(or alpha entry) of the incoming caller.
! It is possible that the Phone Book lookup may take a few
seconds, particularly if both the SIM and Phone Book have
many entries.
20 Making and Receiving Phone Calls

Answering a Phone Call

Press O to answer a call. If the signal strength is weak, make
sure that your antenna is fully extended.
If you do not wish to answer a call, you can either:
Press and release C. If you have enabled
- in the Options Menu, the caller will be
Forward If Busy
forwarded to the designated number. Otherwise the caller will
hear a busy tone.
or
Press and hold C. This will reject the incoming call. No Call
Forwarding option will be offered.
If your phone rings and you do not answer it,
will be displayed.

Ending a Phone Call

To end a phone call, press O.
Detailed
Unanswered Call