Selecting VibraCall Alert for Individual Services
To set a vibration alert for specific phone or mail services:
Press *,#,9.
1.
Press n until you see the
2.
"Selct" menu option.
3.
Select "Selct". The first choice is Phone Vibrate.
4.
To view the Vibe/Ring vibration alert choices, press
n on the keypad.
To view other choices, press r.
5.
• To receive vibration alerts only for Mail, select
"Mail Vibe", then select "On".
• To receive vibration alerts for Group and
Private calls, select "Group/Prvt", then select
"On".
6.
Select "Exit" to return to the Vibrate Alert menu.
7.
Select "Exit" again to return to the previous mode.
Setting the Ringer Volume
You can adjust the ringer volume for incoming calls. If you have a second phone
line, you must set each line separately. Be sure to select the desired line before
setting the volume.
Press *, #, 3, 0. The "30=Ringer Volume"
1.
screen displays.
The display shows your current ringer volume.
2.
Press the Volume Control buttons on the side of the
phone to listen as you raise or lower the volume. At
the lowest setting, the screen displays "Ringer Vol-
ume Silent".
3.
When you reach the desired level, select "Exit".
Setting a Ring Style for the Alternate Line
From the Phone Ready screen, press n until you see "Line2".
1.
2.
Select "Line2".
3.
Repeat the procedure for "Setting an Alert Tone Style", above.
16
www.mot.com/iDEN
a djb
a djb
a djb
a djb
a djb