Installing The Cap Over The Universal Connector; Installing The (Optional ) Speaker / Microphone Or Headset - Kenwood TK-5210 Instruction Manual

I
NSTALLING THE
1 If you are not using an
optional speaker/
microphone or headset,
install the cap over the
universal connector.
2 Secure the cap in place
using the attached screw.
I
NSTALLING THE
1 Insert the guide of the
speaker/ microphone or
headset connector into the
groove of the universal
connector.
2 Secure the connector in
place using the attached
screw.
Note: When not using an optional
speaker/ microphone or headset,
install the cap over the universal
connector.
C
AP OVER THE
(O ) S
PTIONAL
U C
NIVERSAL
/ M
PEAKER ICROPHONE OR
ONNECTOR
Universal
connector cap
H
EADSET
Optional
speaker/ microphone
9