Switching Power On/Off; Playing The Audio Component - Kenwood SLG-7 Instruction Manual

Switching Power ON/OFF

Press and hold the POWER key to switch the power ON. The POWER lamp lights up.
Transmitter
Press and hold the POWER key again to switch the Transmitter OFF.
• This product is available for operation when the RF lamps of both the Transmitter and the
Receiver are lit.

Playing the Audio Component

The songs stored on the audio component connected to the Transmitter can be
reproduced in the original high quality from the audio component connected to the
Receiver.
1
Switch the Receiver and the connected audio component ON.
2
Switch the Transmitter ON.
English
Receiver
Transmitter
14
Receiver