Kenwood SLG-7 Instruction Manual page 9

Receiver
¡ Analog output terminals
(AUDIO OUT)
Connect the RCA pin plugs of the
audio cable connected to the LINE IN
terminals of a home audio component.
™ Optical digital output terminal
(OPTICAL OUT)
Connect an optical digital cable
(commercially available) connected to
the optical digital input terminal of a
home audio component.
£ DC input terminal (DC5V)
Connect one of the AC adapters
¡ ™ £
¢
∞
§
¶
¢ Power switch key (POWER)
Press and hold to switch the power
ON/OFF.
∞ Channel selector key (RF)
Press to switch between IDs for use
in communication between the
Transmitter and the Receiver.
§ Power indicator lamp (POWER)
The lamp lights when the power is ON.
¶ Communication indicator lamp (RF)
The lamp lights when the Receiver is
communicating with the Transmitter.
It flashes during registration of the ID.
9
English