Connecting The Ac Adapters - Kenwood SLG-7 Instruction Manual

Connecting the AC Adapters

Connect the AC adapters (supplied) to the Transmitter and the Receiver.
Transmitter
¤ Caution
÷ Use the enclosed AC adaptor (AC-050150A) for this product. To prevent a fire or electric
shock hazard, do not use an AC adapter other than the one specified.
÷ The power of this equipment will not be completely cut off from the wall outlet when
the power switch is turned off. Install the equipment so that the wall outlet is easily
accessible and, in case of emergency, immediately unplug the power cord from the wall
outlet.
• The provided power cord is designed for use in Europe. When using the player in a country
outside Europe, please prepare a power cord matching the power cord standard of the
country.
• The two supplied AC adapters are identical. Each of them can be used with either the
Transmitter or the Receiver.
• The Transmitter is equipped with a built-in rechargeable battery so that it can be used
without connecting the AC adapter. However, the built-in battery has not been fully
charged at the time of purchase, so it should be fully recharged with one of the AC
adapters. Recharging completes in about 3 hours.
English
To wall AC outlet
10
Receiver
To wall AC outlet