Kenwood KRF-V7050D Instruction Manual page 30

30
Midnight mode (Dolby Digital mode only)
When watching movies at night , you might not be able to raise the volume
as loud as normal. Midnight mode compresses the dynamic range of
previously specified parts of the Dolby Digital sound track (like scenes
with sudden increases in volume) to minimize the difference in volume
between the specified and non-specified parts. This makes it easy to hear
all of the sound track, even when listening at low volumes.
1 Press the SOUND key repeatedly until "NIGHT" appears on the
display.
• This can be selected only if CD/DVD, DVD/6ch, VIDEO2 or VIDEO3
is selected as the source and the listen mode is set to "DOLBY
DIGITAL."
2 Use the MULTI CONTROL knob or keys to select the ON or
OFF setting.
SP A B TI.VOL
L C R
CLIP MUTE
LFE
RDS EON PTY
SL S SR
TP TA NEWS
• The adjustment item is displayed for approximately 8 seconds.
• Some Dolby Digital software may not be compatible with the Midnight
mode.
Circle surround mode
When you enjoy multi sound from the stereo source (Circle Surround),
you can select the circle surround mode.
1 Press the LISTEN MODE or LSTN M. key repeatedly until
"CIRCLE SURROUND" appears on the display.
2 Press the SOUND key repeatedly until "CINEMA" or "MUSIC"
appears on the display.
3 Use the MULTI CONTROL knob or keys to select "CINEMA"
(for movies) or "MUSIC" (for music).
Panorama mode (Pro Logic II Music mode only)
When listening to music, you will be able to enjoy the "wraparound"
sound effect when you adjust the panorama mode.
1 Press the SOUND key repeatedly until "PANORAMA" appears
on the display.
• The PANORAMA setting indication scrolls across the display.
"PANORAMA" will be scrolled from right to left.
SP A B
L C R
CLIP
SW
SL S SR
2 Use the MULTI CONTROL knob or keys to select
PANORAMA ON or OFF.
1 ON
:PANORAMA mode is ON.
2 OFF :PANORAMA mode is OFF.
SP A B
L C R
CLIP
SW
SL S SR
Dimension mode (Pro Logic II Music mode only)
When listening to music with certain recordings, you will also be able to
achieve a suitable balance from all the speakers by adjusting the dimension
mode.
1 Press the SOUND key repeatedly until "DIMENSION"
2 Use the MULTI CONTROL knob or keys to adjust the
FM AUTO SOUND DIGITAL AUTO
AM PRO LOGIC S.DIRECT MEMO
MHz 3 STEREO MONITOR ST.
TUNED
kHz DOWN MIX DSP
Center width mode (Pro Logic II Music mode only)
Center width adjustment allows you to enjoy an enchanced sound when
listening to music through center image from only center speaker, or left
and right speakers or various combinations adjustments.
1 Press the SOUND key repeatedly until "CENTER WIDTH"
2 Use the MULTI CONTROL knob or keys to adjust the left-
AUTO SOUND DIGITAL
PRO LOGIC
AUTO SOUND DIGITAL
PRO LOGIC
appears on the display.
• The DIMENSION indication scrolls across the display.
soundfield towards the rear or the front.
Soundfield is adjusted towards the front.
SP A B
L C R
CLIP
SW
SL S SR
G
Soundfield is in neutral postion.
SP A B
L C R
CLIP
SW
SL S SR
G
Soundfield is adjusted towards the rear.
SP A B
L C R
CLIP
SW
SL S SR
appears on the display.
• The CENTER WIDTH indication scrolls across the display.
• When the center speaker is switched OFF, this mode will not
be effective.
center-right output.
Center image will be heard from center speaker only.
SP A B
L C R
CLIP
SW
SL S SR
Center image will be heard from left and right speakers only.
SP A B
L C R
CLIP
SW
SL S SR
• When in other postions, center image from center speaker, left and
right speakers can be heard simultaneously with various
combinations.
Ambience effects
AUTO SOUND DIGITAL
PRO LOGIC
AUTO SOUND DIGITAL
PRO LOGIC
AUTO SOUND DIGITAL
PRO LOGIC
AUTO SOUND DIGITAL
PRO LOGIC
AUTO SOUND DIGITAL
PRO LOGIC