Kenwood HM-V655MP Instruction Manual page 17

Listening through headphone
Insert the headphone plug into the headphone jack.
÷ Headphone with a stereo mini plug can be con-
nected.
÷ The sound from all speakers are cut off.
Muting the sound temporarily
Remote control unit only
MUTE
÷ Press again to resume the original volume.
÷ This is also canceled when the volume is changed.
Enhancement of bass
SOUND
Each press switches the modes as follows.
1 "EX.BASS" lights.
The low frequencies are enhanced regard-
less of the current volume level.
2 "LOUD" (Loudness) lights.
The low frequencies are enhanced according
to the current volume level. (Effective during
low-volume listening.)
3 Both indicators off.
Canceled.
÷ Adjusting the tone while the "LOUD" or "EX.BASS"
indicator is lit. Sound enhancement mode is can-
celed when the indicator turns off.
Tone adjustment
Remote control unit only
The lowest and highest frequency bands can be
adjusted independently.
1
Select the frequency band.
Each press switches the operation.
1 "BASS" (low frequency) adjustment
2 "TREBLE" (high frequency) adjust-
ment
3 Normal mode
(Go to step 2 within 8 seconds.)
2
Adjust.
P.CALL
(To adjust the other frequency band, repeat steps
1 and 2 for it.)
÷ The levels of both "BASS" and "TREBLE" can be ad-
justed in 2 steps in the range between – 8 and +8.
÷ Adjusting the tone while the "LOUD" or "EX.BASS"
indicator is lit. Sound enhancement mode is can-
celed when the indicator turns off.
Basic use method
TONE
P.CALL
17 EN