Kenwood HM-V655MP Instruction Manual page 11

9
rec key
Press to start tape recording. Pressing this key during
recording initiates record-pause after leaving a no-
sound blank of about 4 seconds.
0
O.T.E. key
Press to start recording CD-DA or VIDEO CD (with PBC
OFF) onto a tape with one-touch operation.
Pressing this key during CD-DA or VIDEO CD (with
PBC OFF) playback records only the track being played
onto tape. Pressing it while CD-DA or VIDEO CD (with
PBC OFF) are in stop state will record all the tracks
onto tape.
!
4 and ¢ multi control keys
In the normal mode:
CD-DA, VIDEO CD and MP3 file :
Press to skip tracks.
Press to switch the VIDEO CD screen.
TAPE :
Press to fast forward or rewind tape.
TUNER :
Press to select a preset radio station.
In the menu mode (selected by pressing the mode key),
press these buttons to select the desired menu item. To
set or enter setting of the menu item, press the set/demo
key.
\
\
÷ Pressing these multi control keys switches the display
contents.
"TAPE RVS"
"AUTO PRESET
(Only when the TUNER input is selected)
"INPUT
(Only when the AUX input is selected)
"TIMER
"TIME ADJUST
"APS
÷ The function of these keys returns to the normal mode
when they have not been operated for 20 seconds.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory.
This is called standby mode. Under the condition, the system can be turned ON by the remote control unit.
¶
›
(
™
£
\
\
™
¢
?"
r
?"
u
?"
t
?"
9
?"
7 Tuning Mode key
CD-DA, VIDEO CD, MP3 file and TAPE:
Press to stop a disc or tape operation.
Press to stop recording.
During VIDEO CD (with PBC ON) or MP3 file operat-
ing, press to return to the higher layer of the hierar-
chy.
TUNER :
Press to switch between the AUTO (auto tuning,
stereo reception) and MONO (manual tuning, mon-
aural reception) modes.
Standby mode :
Press to display the clock.
@
) CD open/close key
Press to open or close the CD tray.
#
Display panel
$
Basic operation keys
AUX key
Press to reproduce the external source component
connected to the AUX (analog auxiliary input) jacks.
TUNER /band key
Press to select the TUNER input.
This key is also use to select the received broadcast
band.
CD 6 key
Press to select the CD input and start playback. During
CD-DA, VIDEO CD or MP3 file playback, press to pause.
During VIDEO CD (with PBC ON) or MP3 file operating,
press to advance to the lower layer of the hierarchy.
TAPE 2 3 key
Press to select the TAPE (cassette deck) input and start
playback of a tape. Pressing this key during tape play-
back switches the tape transport direction.
%
standby/timer indicator
Lights up when the unit is set to the Standby mode of
power.
Red : Ordinary standby.
Green : Timer standby.
Off : The unit is On.
^
key
Press to set the unit to On or Standby.
Controls and indicators System connection
(™
¶
‡·
∞
t
*
r
£
*‡·
¡
^
11 EN