Table of Contents
Advertisement
Stopping/pausing recording
•
Operation is possible with either the main unit or the remote controller.
• Erasing a recording
• To pause recording
•
Press the [PAUSE] button.
If five minutes elapse in pause mode, the
rotating head moves away from the tape
to protect the tape. (The REC indicator
blinks.1
• To stop without recording
an END-ID (See page 26)
•
Press the [STOP/EJECT] button or press
the remote controller's [STOP] button .
• To stop after recording an
END-ID (See page 26)
•
During recording, press the [FF/CUE] but-
ton for at least two seconds. (After the
EN D-I D is recorded for nine seconds, the
unit enters stop mode.1
•
To erase a tape, set the unit to record mode with nothing connected to the [DIGITAL I/O] jack.
•
Do not attach the separately sold AID converter unit.
20
DX-7
Advertisement
Table of Contents
