Editing - Kenwood DP-R6090 Instruction Manual

Editing

The following procedure allows to record a CD within the
specified tape length so that no music is interrupted in the
18
middle at the ends of sides A and B.
Preparation
÷ Load a disc in the CD player.
÷ Check that the unit is in the normal play
1
Light the "EDIT" indicator.
Do this operation in the stop mode.
REMOTE CONTROL UNIT Go to step
RC-P0601
If more than 8 seconds have elapsed,
press the key again.
2
Select the disc.
REMOTE CONTROL UNIT
RC-P0601
Go to step
3
Enter the recording time of the tape.
When using the numeric keys:
REMOTE CONTROL UNIT
RC-P0601
When using the TIME DISPLAY key:
1 Select the time.
DISPLAY
REMOTE CONTROL UNIT
RC-P0601
TRACK mode.
EDIT
2
within 8 seconds.
DISC SELECTOR
1 2 3
4 5
3
within 8 seconds.
1 2 3
4 5 6
7 8 9
0 +10
2 Set the entry.
TIME
EDIT
!
REMOTE CONTROL UNIT
RC-P0601
: Keys and control used in the operations described on this page.
E D
Press the numeric keys as shown below.
30-minute tape : 000)
46-minute tape : 00006
E D
÷ Recording within 99 minutes can be specified in minutes (2 digits).
÷ If you commit a mistake in time entry, press the P.MODE key and
restart the procedure from the beginning.
÷ By pressing the TIME DISPLAY key the set time-length intervals will
change in this order:
÷ The interval length can be adjusted with the skip keys 4 and ¢ in
units of one minute (to a maximum of 99 minutes).
÷ Automatic editing is executed for side A and side B,
Blinks.
I T D S I C ?
I T D S I C 3
" 46=54=60=74=90=
DP-R7090/R6090 (En)
C 4 - 6
??
"