Advertisement
Quick Links
Please study these instructions carefully before installing your new complete fuel system kit. If you have any questions, please call
our Technical Hotline at: 1-800-416-8628, 7:00 am to 5:00 pm, Monday - Friday, Pacific Standard Time or e-mail us at
Edelbrock@Edelbrock.com.
❑ 1
Edelbrock Fuel Pump #1790
❑ 1
Edelbrock Fuel Pressure Regulator Kit #1728
❑ 1
Edelbrock Victor Jr. LS1 Fuel Rail Kit #3638
❑ 1
Edelbrock Electric Fuel Pump Relay Kit #1795
❑ 2
Russell 3/8" NPT x -6 AN male adapter
❑ 2
Russell 3/8" NPT x -8 AN male adapter
❑ 2
-8 AN dry sump union
❑ 3
-6 AN dry sump union
❑ 12
Tie wraps
❑ 1
10 Micron fuel filter, -10 AN I/O
❑ 1
Billet Y-block -10 AN inlet, -8 AN outlets
❑ 5
-10 AN straight x -8 flare reducer
❑ 20 ft.
Russell -8 hose
❑ Basic hand tools
❑ Miscellaneous hardware for mounting components
❑ Drill motor & bits
❑ Wire crimpers or soldering equipment
❑ Extra wire (Red & Black, 12 gauge & 18 gauge)
❑ 10A inline fuse
Gasoline and gasoline fumes are extremely flammable. Work in a well-ventilated area away from open flames,
sparks, or other sources of ignition. Try to contain gasoline when connections are loosened, and clean up any
spills immediately. Failure to do so can result in a fire or explosion.
Proper installation is the responsibility of the installer. Improper installation will void warranty and may result in
© 2007 Edelbrock Corporation
Brochure No. 63-641530
KIT CONTENTS
TOOLS & SUPPLIES RECOMMENDED
WARNING!
IMPORTANT NOTE:
poor performance and engine or vehicle damage.
Page 1 of 5
RUSSELL GM LS1 COMPLETE FUEL SYSTEM
INSTALLATION INSTRUCTIONS
❑ 20 ft.
Russell -6 hose
❑ 10
Russell -6 cushion clamps
❑ 10
Russell -8 cushion clamps
❑ 3
-6 AN Straight hose end
❑ 4
-8 AN Straight hose end
❑ 1
-6 AN 45° Swivel hose end
❑ 2
-8 AN 45° Swivel hose end
❑ 2
-6 90° Swivel hose end
❑ 4
-8 90° Swivel hose end
❑ 10 ft.
Russell 3/16" Wrap-It wire protective sleeve
❑ 10 ft.
Russell 5/16" Wrap-It wire protective sleeve
❑ 1
Russell assembly lube/sealant kit
❑ 1
Russell 0-100 psi fuel pressure gauge
❑ AN Wrenches
❑ EFI fuel line disconnect tool
❑ Multimeter or test light
❑ Wire strippers
❑ Wire terminals & connectors
❑ Assorted nuts & bolts
Catalog #641530
Catalog #641530
Rev. 10/07 - AJ/mc
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Edelbrock Russell 641530
Summary of Contents for Edelbrock Russell 641530
- Page 1 Edelbrock Fuel Pump #1790 ❑ 1 Edelbrock Fuel Pressure Regulator Kit #1728 ❑ 1 Edelbrock Victor Jr. LS1 Fuel Rail Kit #3638 ❑ 1 Edelbrock Electric Fuel Pump Relay Kit #1795 ❑ 2 Russell 3/8” NPT x -6 AN male adapter ❑...
-
Page 2: Before Beginning
Use a shop towel or rag to catch any residual fuel remaining in the factory lines. Remove the bolts holding the fuel rail to the intake manifold. © 2007 Edelbrock Corporation Brochure No. 63-641530 BEFORE BEGINNING WARNING:... - Page 3 Following the instructions included with the fuel pump, install the fuel pump to the vehicle. Russell Relay kit install: Mount Edelbrock fuel pump relay at a suitable location under the hood (e.g. radiator support, inner fender, firewall) away from extreme heat.
- Page 4 Determine the hose path and length required for the fuel hose from the fuel pump to the fuel filter inlet. Build and install the hose assembly. © 2007 Edelbrock Corporation Brochure No. 63-641530 Determine the hose paths and lengths required for the fuel hose leading from the fuel filter outlet to the inlet of the Y block.
- Page 5 © 2007 Edelbrock Corporation Catalog #641530 Page 5 of 5 Brochure No. 63-641530 Rev. 10/07 - AJ/mc...
- Page 6 Edelbrock Corporation, 2700 California St., Torrance, CA 90503 Tech Line: 800-416-8628 E-Mail: Edelbrock@Edelbrock.com © 2007 Edelbrock Corporation Catalog #641530 Brochure No. 63-641530 Rev. 10/07 - AJ/mc...
Need help?
Do you have a question about the Russell 641530 and is the answer not in the manual?
Questions and answers