Kenwood KNA-DV2100 Installation Manual page 10

Connection
E
Parking sensor wire (Green)
To parking brake detection switch harness of car
2WARNING
For the sake of safety, be sure to connect the parking sensor wire.
To the car speed signal harness
2WARNING
• Do not cut off the holder marked "S SENS" (containing a protection diode) of the car
speed signal detection wire H (White). Doing so will cause a fault with the car.
• Please contact your dealer for information about the connection method. A connection
error will lead to car breakdown.
10
Wiring harness G
PRK SW
Car speed signal intermediate wire H (White)
S SENS
S SENS
(3A)
(5A)