Firmware Version Display; Internal Memory Format; Demonstration Mode Setting - Kenwood KDC-X9006U Instruction Manual

In Standby mode

Firmware version display

Displaying the firmware version with the unit.
Turn the Control knob.
Select the "F/W Version : " display.
In Internal Memory source

Internal Memory Format

Perform format to delete all audio files stored in
internal memory.
⁄
• The content of formatted memory cannot be restored.
Be careful when formatting.
1
Enter Internal Memory
Press the [SRC] button.
Select the "Internal Memory" display.
2
Enter Menu mode
Using the Control knob, select "MENU".
For the operation method, refer to <Function
Control mode> (page 9).
3
Select the Internal Memory Format
Turn the Control knob.
Select the "INT.MEM.Format" display.
4
Enter the Formatting mode
Press the Control knob for at least 1 second.
"Format?" is displayed.
5
Start format
Select "YES" using the Control knob.
"Format... " display blinks.
When the formatting finishes, "Completed" is
displayed.
6
Exit Formatting mode
Press the [FNC] button.
In Standby mode

Demonstration mode setting

Sets the demonstration mode.
1
Select the Demonstration mode
Turn the Control knob.
Select the "DEMO Mode" display.
2
Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time you press the knob at least 2 seconds,
the Demonstration mode alternates between the
settings shown in the table below.
Display Setting
"DEMO Mode : ON" The Demonstration mode function is ON.
"DEMO Mode : OFF" Exit Demonstration mode (Normal mode).
|
English
37