Kenwood KDC-X9006U Instruction Manual page 46

Troubleshooting Guide
Protect: The speaker wire has a short-circuit or
touches the chassis of the vehicle, and then
the protection function is activated.
➪ Wire or insulate the speaker cable properly
and press the reset button. If the "Protect"
code does not disappear, consult your
nearest service center.
Unsupported File:
An Audio file is played with a format that this
unit cannot support.
Copy Protection:
A copy-protected file is played.
DEMO MODE: The Demonstration mode has been selected.
➪ The <Demonstration mode Setting> (page
37) is ON. Turn it OFF.
No Device: The USB device is selected as a source
although no USB device is connected.
N/A Device: An unsupported USB device is connected.
➪ For the supported USB devices, refer to
<http://www.kenwood.com/usb/>.
No Music Data/ Error 15:
• The connected USB device contains no
playable audio file.
• The Internal Memory source contains no
playable audio file.
• Media was played that does not have data
recorded that the unit can play.
USB ERROR: The connected USB device is rated a current
capacity higher than the allowable limit.
➪ Check the USB device with reference to
<http://www.kenwood.com/usb/>.
Some trouble may have occurred to the
connected USB device.
➪ Change the source to any source other
than USB. Remove the USB device.
iPod Error: Connection to the iPod has failed.
➪ Remove the USB device and then
reconnect it.
➪ Confirm that the software for the iPod is
the latest version.
USB REMOVE: The Remove mode has been selected for the
USB device. You can remove the USB device
safely.
|
46
English
Over Capacity: Recording or copying was canceled because
internal memory space ran out while
recording from music CD or copying from
USB device.
➪ Delete unnecessary files and record or
copy once more.
Name Exists. Raname... :
Name Exists. Auto Rename? :
The name entered while recording CD
already exists. Or a file or folder with the same
name already exists while copying from USB
device.
➪ Change the name or delete the existing
file and record or copy once more.
Import Error: Recording is canceled because there is a
scratch on the CD and it cannot be played.
Copy Error: • An incompatible digital audio player was
used.
• Cannot copy because the USB device is not
firmly inserted.
Delete Error:
Format Error: Abnormal condition detected while deleting
or formatting.
➪ Repeat the operation once more. This may
take some time. If the message recurs,
contact your nearest Kenwood dealer.
Can't Download:
Download Error:
This unit does not work properly for some
reason.
➪ Press the reset button to download it
again. If this error is still displayed, consult
a local Kenwood dealer.
➪ Try all over again from the start. If this error
is still displayed, consult a local Kenwood
dealer.
No Display File:
No file that can be downloaded is contained
in the CD-R/ CD-RW/ USB device.
➪ Make sure that a files created with
referring to <http://www.kenwood.net-
disp.com> is contained in the CD-R/ CD-
RW/ USB device.
Do not delete the extension (.kbm)
created when the file was created.
Incorrect File: The file selected to be downloaded has a
format that this unit cannot read.
➪ Recreate the file.
Writing Error: Writing failed while the file was downloaded.
➪ Try the downloading again.