Tuner Features Select Ing Tuning M Ode; Tuning; Local Seek Function - Kenwood KDC-4060RG Instruction Manual

Tuner features
(See page 6)
Select ing Tuning M ode
You can choose from three tuning modes: auto seek, preset
station seek, and manual. The "Auto1" indicator lights up
w hen auto seek tuning is selected, and the "Auto2" indicator
lights w hen preset station seek tuning is selected.
1
Hold dow n the M ENU button for one second or more.
"M ENU" is displayed and the menu mode is turned on.
2
Press the ¢ button repeatedly until the tuning function
appears in the display.
Press the 4 button to search in the other direction.
The tuning method is displayed as " AUTO1," " AUTO2," or
" M ANUAL," referring respectively to auto seek tuning, preset
station seek tuning, and manual tuning.
3
Sw itching settings
Press either the AM button or FM button to sw itch the tuning
mode.
The display and setting w ill change.
4
Press the M ENU button to end the menu mode.

Tuning

1
Press the TUN button to turn the radio on.
2
Press either the FM or AM button to select the band.
Each time you press the FM button, the band sw itches
betw een the FM 1, FM 2 and FM 3.
Press the AM button to select the M W and LW bands.
3
• Auto Seek Tuning
Press the ¢ button to seek increasing frequencies.
Press the 4 button to seek decreasing frequencies.
• Preset station seek tuning
Press the ¢ button to move to the next preset station (i.e.,
the one w ith the next highest number), and the 4 button to
move to the last preset station (i.e., the one w ith the next
low est number).
N OTE
If the frequencies stored at the preset numbers receive
stations w hich w ere not originally memorized w hen traveling
long distances, the preset number is not displayed. In such
cases, pressing the 4 / ¢ button to use preset station
seek w ill receive channel 1.
• M anual Tuning
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
N OTE
The ST indicator lights up w hen stereo broadcasts are being
received.
Local Seek Funct ion
With the local seek function turned on, auto seek tuning skips
stations w ith relatively poor reception.
Turning Local Seek Function On/ Off:
1
Hold dow n the M ENU button for one second or more.
"M ENU" is displayed and the menu mode is turned on.
2
Press the ¢ button repeatedly until the local seek function
appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "LO.S ON" or "LO.S OFF" in
the display, indicating that the local seek function is on or off,
respectively.
3
Sw itching settings
Press either the AM button or FM button.
The display and setting w ill change.
When local seek function is on, the LO.S indicator is turned on.
4
Press the M ENU button to end the menu mode.
— 11 —