Loudness; Audio Control; Speaker Setting; System Q - Kenwood KDC-2027SA Instruction Manual

Loudness

Compensating for low and high tones during low volume.
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1 second the
Loudness turns ON or OFF.
When it's ON, "LOUD" indicator is ON.

System Q

You can recall the best sound setting preset for different types of
the music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound setting switches.
Sound setting
Flat
Rock
Top 40
Pops
Jazz
Easy
• Each setting value is changed with the <Speaker setting> (page
8).
First, select the speaker type with the Speaker setting.
• When the System Q setting is changed, the Bass, Middle, and
Treble set in audio control replace the System Q values.
Display
"FLAT"
"ROCK"
"TP40"
"POPS"
"JAZZ"
"EASY"

Audio Control

1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [AUD] button for at least 1 second.
3
Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
4
Adjust the Audio item
Press the [4] or [¢] button.
Adjustment Item
Bass level
Middle level
Treble level
Balance
Fader
5
Exit Audio Control mode
Press the [AUD] button.
— 7 —
Display Range
"BAS" –8 — +8
"MID" –8 — +8
"TRE" –8 — +8
"BL" Left 15 — Right 15
"FD" Rear 15 — Front 15