Redialing; Setting Up The Hands-Free Phone - Kenwood KCA-BT100 Instruction Manual

Hands-Free Unit Control

Redialing

You can redial, one of the last 10 phone numbers
that you have called or received.
1
Display the Search for Out Going Calls or
Incoming Calls screen
or
The Out Going Calls or Incoming Calls list screen
appears.
Out Going Calls or Incoming Calls screen
Incoming Calls
2
Kenwood
1234567890
Kenwood
1234567890
Kenwood
1234567890
Kenwood
1
1234567890
Kenwood
1
1234567890
1 Scrolls the list.
2 Enters the destination name.
3 Change to record of redial list.
4 Enters the destination data and returns to the
Hands-Free Control screen.
5 Returns to the Hands-Free Control screen.
2
Select a destination you wish to call
3
Confirm the destination
O K
The Hands-Free Control screen appears again. The
selected destination data is displayed.
4
Make a call
You can start talking when the destination
responds.
16
|
English
(For Monitor receiver)
Out Going Calls
Incoming Calls
AUTO
D I S P
OK
Return
5
End the call
The previous screen reappears.
• The Out Going Calls list screen or Incoming Calls list
screen shows the list of the calls originated from or
received at this unit. They are not the ones stored in
the cell-phone memory.

Setting up the Hands-Free Phone

The Hands-Free system can be set as follows.
3
S e t Up
4
Hands-Free Set Up screen
5
Hands Free Set Up
Au t o A n s w e r i n g
1
P h o n e Vo i c e
2
B e e p
4
S e l e c t S e l e c t
1 Sets an automatic response time after call
termination. (
"Off": This function can not use.
"0-99": Sets to calling ring time (second).
2 Sets a ringing tone output position.
( "F-Right")
"F-Left": Outputs the tone from the front
left-hand side speaker.
"F-Right": Outputs the tone from the front
right-hand side speaker.
"Front All": Outputs the tone from the both
front speakers.
3 Set the beep of the incoming call. (
"On": Beep is heard.
"Off": Beep is canceled.
4 Display the Phone Select screen.
5 Display the Phone Delete screen.
6 Returns to the Hands-Free Control screen.
AUTO
1
8
2
F - R i g h t
3
O n
5
D e l e t e S e l e c t
6
"8")
"On")
Return