Display Example - Kenwood TM-D710A Manual

DISPLAy ExAmPLE

Page 1
q: Station icon
w: Status text
e: Call sign
r: Date
t: Time (packet received)
y: Situation
u: Direction of station
i: Distance from station (mile or km)
o: Position comment
1
For packets received from Mic-encoder stations including
1
TM-D710s, TM-D700s and TH-D7s, position comments
are displayed in the fourth line.
(Object)
q: Call sign
Page 2
(Mobile station)
q: Moving direction
w: Moving speed (m: Mile/hour or k: km/hour)
e: Altitude (' :Feet or M: Meter)
(Weather station)
q: Rainfall (" or mm)
w: Air temperature
e: Wind direction
r: Wind velocity (mph: Mile/hour or kph: km/hour)
t: Atmospheric pressure
y: Humidity
(Fix station)
q: Transmit power
w: Height of antenna (elevation) (' : Feet or M: Meter)
e: Antenna gain
r: Antenna directivity omni : Omnidirectional
Page 3
q: Position data
w: Grid square locator
(Packet path)
q: Call sign
This transceiver is capable of displaying the following
icons as station IDs.
<APRS>
<NAVITRA>
Some icons may appear with overlay characters as below
if the received icon data includes them.
The following icons show the directions of stations relative
to your position. For example, " " indicates the other
station is located at the northeast relative to your position.
0.0 to 9999 miles (or km) are shown for distances from
other stations. "xxxxmi" (or "xxxxkm") is shown for
distances over 9999 miles (or km). If you do not change
the position data in Menu 626 (DISPLAY UNIT 1 - SPEED,
DISTANCE) from the default, "----mi" (or "----km") is
shown.
The default units for distance and temperature differ
depending on market versions; mile/ °F for the U.S.A./
Canada version, and kilometer/ °C for the other market
versions. If necessary, access Menu 626 (DISPLAY UNIT
1 - SPEED, DISTANCE) and/or Menu 626 (DISPLAY
UNIT 1 - TEMPERATURE) to change the setting(s).
Note: Some stations transmit APRS packets through TNCs
connected to GPS receivers. If you receive packets from those
stations, "GOOD" (satellites tracked) or "LAST" (satellites not tracked)
will be shown as the situation, with GLL, GGA, or RMC which
designates $GPGLL, $GPGGA, or $GPRMC format.
APRS-