Table of Contents
Advertisement
D-View 5.1 User's Guide
The statistics table displays information for each port of a transparent bridge. Except
for the Index column, all columns in this table can be resized by dragging their
respective right borders with the mouse left button.
The following describes each column:
The Index column displays the corresponding index number of each entry.
The Counters column displays the various bridge port counters. For information about
these counters, see the discussion below.
The Total column displays the accumulated count since resetting the statistics
counters. These counters are reset whenever you restart the device, reset the port, or
click the Reset button.
The Rate/s column displays the total count per second.
The Avg Rate/s column displays the average count per second.
The Peak Rate/s column displays the peak count per second.
The Peak Occurred At column displays the date and time when the peak count
occurred.
The Poll Interval buttons set the polling time of the management console. Polling time
determines how often the management console polls the device for statistics. A polling
time of 5 seconds for example means that the management console polls the device
every five seconds to retrieve statistics values. These values are then processed and
displayed on the table. To increase the polling time, click the up-arrow button; to
decrease, click the down-arrow button.
The Reset button resets all bridge port counters back to zero.
The Pause button pauses device polling.
The Resume button resumes device polling.
The NextPort button selects the next port (that is, interface) on the device for
monitoring.
The Target field displays the selected port.
The FirstPort button selects the first port (that is, interface) on the device for
monitoring. The following describes the various bridge port counters:
The Input Frames counter corresponds to the Dot1dTpPortInFrames MIB object of the
dot1dTp group. This read-only object displays the number of frames received by the
port from its segment.
The Output Frames column corresponds to the Dot1dTpPortOutFrames MIB object of
the dot1dTp group. This read-only object displays the number of frames transmitted by
the port to its segment.
150
Advertisement
Table of Contents
