Honeywell RTH7000 Operating Manual page 5

This thermostat is ready to go!
Your new thermostat is pre-programmed and ready to go. All you have to do is set the
time and day. Then check the settings below and change if needed:
1. Set clock ...............................................................................................See page 6
2. Select fan setting: Preset to Auto ...................................To change, see page 7
3. Select system setting: Preset to Heat ............................To change, see page 8
4. Program schedules: Preset to energy-saving levels
while you're at work or asleep (assumes you wake at
6 am, leave at 8 am, return at 6 pm and go to bed
at 10 pm) ................................................................... To change, see pages 10–14
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time, and
manually adjust the temperature (see pages 13–14).
3
RTH7400/RTH7500 Series
69-2222EF—03