Ipmi 1.5/2.0 Command Support List - Dell PowerEdge C8000 Using Instruction

FILE LOCATION: D:\Projects\User Guide\Server\Dell\Zeus\HOM\BMC

IPMI 1.5/2.0 Command Support List

The IPMItool program provides a simple command-line interface for
managing IPMI-enabled devices. The IPMItool enables you to read the BMC
devices, BMC watchdog timer, PEF/PET alerts, SDR, events, SEL, FRU
information, serial/modem devices, set LAN configuration parameters,
update the BMC firmware remotely and perform remote server chassis or sled
server power control.
NOTE:
For more information about the standard IPMI tool commands, see
ipmitool.sourceforge.net/manpage.html.
The following tables include all commands defined in the IPMI v2.0
specifications. All mandatory commands and some optional functions are
supported. Special functions beyond the scope of IPMI v2.0 are implemented
as original equipment manufacturer (OEM) commands.
In the O/M column:
• M = Mandatory in the IPMI spec and is implemented.
• O = Optional command supported in this implementation.
• N = Not supported in this implementation.
See the Deployment Toolkit Version 1.3 User's Guide for additional
information about installing and using the DTK utilities, and the
Deployment Toolkit Version 1.3 Command Line Interface Reference Guide
for a complete list of all valid options, suboptions, and arguments for using
the BMCCFG.EXE to configure and manage your BMC.
NOTE:
For a complete list of all valid options, requirements, and commands refer to
the BMC Firmware Requirements for DCS/PE-C 1.02 documentation.
52
Manual\BMC\C8000_BMC_HOM_section1.fm