Ipmi 1.5 / 2.0 Command Support List - Dell PowerEdge C1100 Use Instructions

Table 1-28. iBMC User Information
Information
User ID
State
User Name
iBMC Privilege
IPMI LAN Privilege
Serial Over LAN

IPMI 1.5 / 2.0 Command Support List

Table 1-29 shows the IPMI commands.
Table 1-29. IPMI Device Global Commands
Commands
Get Device ID
Cold Reset
Warm Reset
Get Self Test Results
Manufacture Test On
Set ACPI Power State
Get ACPI Power State
Get Device GUID
Broadcast Commands:
Broadcast 'Get Device ID'
Description
Displays a sequential user ID number.
Displays the login state of the user. Enabled or Disabled (Default).
Displays the login name of the user.
Displays the group (privilege level) to which the user is assigned
(Administrator, Operator, User, Custom, or None).
Displays the IPMI LAN privilege level to which the user is assigned
(Administrator, Operator, User, or None).
Allow/Disallow the user to use IPMI Serial over LAN.
NetFn CMD
App 01h
App 02h
App 03h
App 04h
App 05h
App 06h
App 07h
App 08h
App 01h
O/M
M
O
O
M
O
O
O
O
M
Using the Baseboard Management Controller
Supported
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
25