Advertisement
CCTV | How to Demo FlexiDome
CCTV | How to Demo Dinion 2X and FlexiDome 2X analog cameras
Demo 2: Ease of installation
Ease of installation is shown more clearly by demonstrating
the fixed-body camera, so we recommend you use the
Dinion unless your customer expressly asks for the
FlexiDome. In both cases the features to be demonstrated
are the same.
What to demo
Backfocus adjustment
Removable
connectors
6 Modes to
choose from
Instant view update
Test Pattern
Generator
Notch filter
Linelock options
Isolated mounting*
* If you use the FlexiDome camera to give the demonstration, you can simply place it on the table. You will need to
remove the cover to access the camera controls.
IP Cameras
DN
How to demo
Press and hold the Menu button to see the
Install menu. Choose Lens wizard and
select 'set back focus'. Unlock back focus
ring and adjust
Show the removable connectors
Exit the Install menu. Press and release the
Menu button to see Main menu. Select
'Mode' and click through to show each
mode. Go back to main menu to show some
individual settings
Make a change to any setting that produces
a noticeable effect
In the Install menu, select the Test signals
menu. Show some of the Test patterns
In the Install menu, select Connections
In the Install menu, select the
Synchronization menu
Take fixed-body camera out of box. Connect
stand via the isolated mounting
Key message: ease of installation / set-up
Use the steps below to guide you through the
installation demo. Video clips covering many stages of
the 'Ease of installation' demo can be found on the
accompanying USB stick / CD / DVD.
Key points
Ensures optimal focus in all lighting conditions.
Only needs to be performed once at installation.
Easy-to-use adjustment ring requires no
special tools. No neutral density filter needed
Unique to Bosch cameras – zoom lens,
camera, housing. No fiddling with cables
6 preset modes (see table below) make it
easy to match performance to your
application. You can select a mode and adjust
the settings to your exact needs
Any change can be seen instantly.
Many cameras require you to exit menu first
before the result of any changes can be seen
Test signals provide a simple way to check
connection. Independent of the image quality
To prevent cross color effects or artifacts in
the video. This can occur when scenes
include closely spaced vertical lines such as
window bars, drapes / blinds and some
pavement patterns
Important to ensure frame rates can be
achieved. Some DVR / IP encoders need all
cameras to be linelocked together to achieve
full recording frame rates
Mounting helps prevent ground loops
en
en
Bosch Security Systems
Bosch Security Systems
Advertisement
