Advertisement
3.
Insert DVD disc into the DVD-ROM
4.
Power on WSS system
5.
Coming out Warning message shown:
6.
Press "Y" to continue install
7.
After 40~60minutes (Due to USB1.1 ports take longer to recover data) end of the installation and
DVD disc will be ejected automatically. You can see the access LED of DVD-ROM stop blinking.
(Access LED of DVD-ROM keeps blinking while the installation.)
8.
Remove the disc from the DVD-ROM
9.
Push Power button to Shutdown the WSS
10.
Insert other SATA HDDs.
11.
restart WSS system (system booting)
12.
When you see the LCM display is showing "XTOREWSS" and "IP address XXX.XXX.XXX.XXX" it
means WSS system is ready.
13.
Log in as administrator via remote desktop. Default password "winstore"
14.
Install the rest of disks for the RAID 5 volume failover redundancy by click 3DM2 application. As the
following configuration figures.
Xtore WSS R2 OS installation Guide
Page 7
Advertisement
