Advertisement
Quick Links
Xtore WSS2003 R2 OS New-install/Recovery Quick Guide
Latest Viewed: Jun-1st-2007
Purpose:
This Guide provides steps for the new-install/recovery Operating System of Microsoft
Windows Storage Server 2003 R2. With Xtore bundle Recovery DVD disc. You may easy to
install /recover Xtore WSS system as the following models:
1. XN-104R-T2xx Series
2. XN-108R-T2xx Series
3. XN-212R-T3xx Series
Xtore WSS R2 OS installation Guide
Page 1
Advertisement
Related Manuals for Xtore XN200 series XN-004-A1
Summary of Contents for Xtore XN200 series XN-004-A1
- Page 1 Xtore WSS2003 R2 OS New-install/Recovery Quick Guide Latest Viewed: Jun-1st-2007 Purpose: This Guide provides steps for the new-install/recovery Operating System of Microsoft Windows Storage Server 2003 R2. With Xtore bundle Recovery DVD disc. You may easy to install /recover Xtore WSS system as the following models: 1.
- Page 2 MODEL: XN-104/108R-T2xx series Equipments: 1. USB 2.0 external box with DVD-ROM 2. SATA HARD DISK (10GB capacity or above) x 1 (Recommended creating mirror RAID 1 volume and the OS will be reserved 8GB capacity of Volume) 3. Xtore Recovery DVD for model XN-104/108R-T2 series with the latest version and BIOS. (For the default BIOS of setting) USB Keyboard enabled USB FDD as the first boot device...
- Page 3 Remove the disc from the DVD-ROM Push Power button to Shutdown the WSS Insert other SATA HDDs. restart WSS system (system booting) When you see the LCM display is showing “XTOREWSS” and “IP address XXX.XXX.XXX.XXX” it means WSS system is ready. Log in as administrator via remote desktop.
- Page 4 MODEL: XN-212R-T3xx (With 3ware 95xx-12 MI Hardware RAID Card) The WSS in a Hardware-RAID configuration contains the first two drives in a RAID 1 mirrored configuration. And your first two disks contain only OS volumes. The drives in the hardware-RAID WSS are controlled by a 3Ware RAID controller card, 95xx-12MI, installed in your WSS.
- Page 5 Move the cursor to the desired disks, and press enter to select the disks. Move the cursor to Create Unit and press Enter. Xtore WSS R2 OS installation Guide Page 5...
- Page 6 Define other options if necessary. Move the cursor to OK and press Enter. Press F8 to finish. Press Y to save configuration and exit. Perform Preliminaries) Start to recovery data from DVD disc ( see paragraph of Perform Preliminaries Connect the USB DVD-ROM to the WSS Remove other HDDs, only leave First SATA HDD (Please mark those removed SATA disk order for further use, after recovery you have to re-insert disks according to their original disk order to keep data.)
- Page 7 Insert DVD disc into the DVD-ROM Power on WSS system Coming out Warning message shown: Press “Y” to continue install After 40~60minutes (Due to USB1.1 ports take longer to recover data) end of the installation and DVD disc will be ejected automatically. You can see the access LED of DVD-ROM stop blinking. (Access LED of DVD-ROM keeps blinking while the installation.) Remove the disc from the DVD-ROM Push Power button to Shutdown the WSS...
- Page 8 Warning: Be careful if there are data existing in WSS. System recovery will re-install the operating system from scratch, and will delete all existing data/volumes on the first disk. If the first disk contains other non-redundant volumes, e.g. simple, spanned, or striped, those volumes will be deleted. Xtore WSS R2 OS installation Guide Page 8...