Advertisement
MODEL: XN-104/108R-T2xx series
Equipments:
1. USB 2.0 external box with DVD-ROM
2. SATA HARD DISK (10GB capacity or above) x 1 (Recommended creating mirror RAID 1 volume and the OS
will be reserved 8GB capacity of Volume)
3. Xtore Recovery DVD for model XN-104/108R-T2 series with the latest version and BIOS. (For the default
BIOS of setting)
USB Keyboard enabled
USB FDD as the first boot device
USB CD-ROM as the second boot device
Watch Dog Timer Enable
HDD as the third boot device. Other device boot enabled Drive A: None
Warning: Be careful if there are data existing in WSS. System recovery will re-install the operating system
from scratch, and will delete all existing data/volumes on the first disk. If the first disk contains other
non-redundant volumes, e.g. simple, spanned, or striped, those volumes will be deleted.
Perform Preliminaries
1.
Connect the USB DVD-ROM to the WSS
2.
Remove other HDDs, Put first SATA HDD1 only (Please mark those removed SATA disk order for
further use, after recovery you have to re-insert disks according to their original disk order to keep
data.)
3.
Insert DVD disc into the DVD-ROM
4.
Power on WSS system
After 10 minutes end of the installation and DVD disc will be ejected automatically. You can see the
access LED of DVD-ROM stop blinking. (Access LED of DVD-ROM keeps blinking while the
installation.)
Xtore WSS R2 OS installation Guide
Page 2
Advertisement
