Xtore XN200 series XN-004-A1 Install Manual page 6

6. Define other options if necessary. Move the cursor to OK and press Enter.
7. Press F8 to finish. Press Y to save configuration and exit.
8. Start to recovery data from DVD disc ( see paragraph of
Perform Preliminaries
1. Connect the USB DVD-ROM to the WSS
2. Remove other HDDs, only leave First SATA HDD (Please mark those removed SATA disk order for
further use, after recovery you have to re-insert disks according to their original disk order to keep
data.)
Xtore WSS R2 OS installation Guide
Perform Preliminaries)
Page 6