Advertisement
5.
Remove the disc from the DVD-ROM
6.
Push Power button to Shutdown the WSS
7.
Insert other SATA HDDs.
8.
restart WSS system (system booting)
9.
When you see the LCM display is showing "XTOREWSS" and "IP address XXX.XXX.XXX.XXX" it
means WSS system is ready.
10.
Log in as administrator via remote desktop. Default password "winstore"
11.
To create a mirror OS volume
support booting failover of system volume. Booting failover of system volume is supported with
failover BIOS and watchdog timer implementation
12.
Install second disks for performing mirror volume. Right click "my computer"
management"
convert 2 disks as "dynamic" disk
13.
Install the rest of disks for the RAID 5 volume failover redundancy. As the following configuration
figures.
Warning: Be careful if there are data existing in WSS. System recovery will re-install the operating system
from scratch, and will delete all existing data/volumes on the first disk. If the first disk contains other
non-redundant volumes, e.g. simple, spanned, or striped, those volumes will be deleted.
Xtore WSS R2 OS installation Guide
Note: One more HDD is necessary for system volume mirror to
Page 3
"Manage"
"Disk
Advertisement
