Alert Tones And Lights; Screen Icons; Handset Alert Tones; Telephone Base Tones - AT&T CL82351 User Manual

Appendix

Alert tones and lights

Screen icons

Battery status - battery is charging (animated display).
Battery status - low battery (flashing); place handset in
telephone base or charger to recharge.
Speakerphone - the speakerphone is in use.
Ringer off - the handset ringer is off.
New voicemail - you have new voicemail from your
telephone service provider.
Answering system on - the answering system is turned on
ANS ON
to answer calls.
Message - new message in the built-in answering system.
NEW
New caller ID log - new or missed calls.
MUTE
MUTE - the handset microphone is off.
Message counter - number of message playing/total
MSG #
1/2
number of messages.

Handset alert tones

1 short beep
1 long beep
2 short beeps
Confirmation tone
(3 rising tones)
4 beeps
4 short beeps

Telephone base tones

Beeps every 10 seconds
Fast ringer tone
Long beep
4 short beeps
Tone of each key press, if key tone is turned on.
Indication to begin recording a message, memo or announcement.
You are pressing qCID or pDIR on a cordless handset when the
volume is already at its highest or lowest setting.
-OR-
Call waiting tone.
-OR-
Error tone.
The system has completed the command successfully.
The other party has ended your intercom call.
-OR-
The handset has gone out of range from the base during a call.
Low battery warning.
Message alert.
You are setting the ringer volume by pressing the q/VOL/p keys
on the telephone base.
Indicates the start of message recording during call screening or
the end of a message playback session.
Registration failure tone.
60
NEW
MUTE
ANS ON
MSG #
10:21
AM
1/2