Table of Contents
Advertisement
Configure System Log
If the log is enabled, the system will log selected events based on their level. The log levels are
•
Emergency
•
Alert
•
Critical
•
Error
•
Warning
•
Notice
•
Informational
•
Debugging.
All events above or equal to the selected log level will be logged and displayed.
If the selected mode is Remote or Both, events will be sent to the specified IP address and UDP
port of a remote system log server.
If the selected mode is Local or Both, events will be recorded in the local memory.
Select the desired values and click Save/Apply button to configure the system log.
6219-X1 Router Users Guide
90
Advertisement
Table of Contents
