Installation Options; Wall Mounting - AT&T 1856 Quick Start Manual

Speakerphone/ answering system with caller id/call waiting

Hide thumbs Also See for 1856:

Getting started

Installation options

NOTE: The mounting bracket must be used for both tabletop use and wall

mounting positions.

Tabletop mount

The telephone base comes with the bracket mounted for tabletop use. If wall

mounting is desired, a telephone outlet wall mounting plate with mounting studs is

required. This mounting plate with studs may be available for purchase from many

hardware or consumer electronics retailers and may require professional installation.

. To remove the bracket, hold the

telephone base in both hands, press

the two bracket tabs and lift the

bracket away from slots

Telephone outlet mounting

plate with mounting studs.

2. Rotate the bracket to the wall mount-

ing position, insert the tabs of the

bracket into slots

and .

telephone base, then press the other

bracket tabs into slots

shown below.

Wall mount

and

on the

and

Table of Contents