Alert E-Mail Setting; Alert E-Mail Function - Mitsubishi Electric XL7100U User Manual

8. ProjectorView

8.6. Alert E-mail setting

8.6.1. Alert E-mail function

When there is something wrong with the projector, an E-mail is automatically sent to the designated address to
notify the error status.
To use this function, it is necessary to change the settings in the Alert E-mail Setup window appropriately.
<Note>
Once you have configured the above settings, the E-mail function remains enabled even after you close the web
browser (ProjectorView). Furthermore, when you set CONTROL SYSTEM in the NETWORK menu to CRESTRON,
the ProjectorView becomes disabled, however, the alert E-mail function remains enabled.
An example: Sending an alert message when the lamp change required.
ProjectorView Alert:
The lamp has reached the maximum usage time.
Replace the lamp and reset the lamp counter.
Please see the user manual for detailed instructions.
Projector name : abc
Projector model : XY1234
Serial number : 12345
Installed date : 2008/01/01
Installed location : 10Factory-5F
Operation time : 2146 hours, 43 minutes
Lamp time : 4000 hours, 0 minutes
Last lamp replaced date : 2008/01/01
Last maintenance date : 2008/01/01
"Projector model" varies depending on the type of projectors.
EN-25