Setting The Network Password; Resetting The Network Settings - Mitsubishi Electric XL7100U User Manual

8. ProjectorView

8.4. Setting the network password

(1) Click [PASSWORD] in the Setup window.
• The window appears to enter the current network password.
(2) Enter the current network password and click [OK]. (The default is "admin".)
• If the password is correct, another window appears to enter a new one.
• If the password is wrong, an error message is displayed. When you click [OK], the current network
password window reappears.
(3) Enter the New network password and Confirm network password, and then click [OK].
• If passwords entered match, the window closes to save the changes.
• If passwords entered do not match, an error message is displayed. When you click [OK], the new network
password window reappears.

8.5. Resetting the network settings

When you reset the network settings, all data and settings specified in 8.3. Entering projector information will be
reverted to factory defaults. Each field will go blank, Alert e-mail service will be set to OFF, Language to English,
Certification setting to ON, and Password setting to "admin".
(1) Click [RESET] in the Setup window.
• The window appears to reset the network settings.
(2) Click [OK] to revert the network settings to factory defaults.
• If you click [CANCEL], the window closes without reset of the network settings.
EN-24