Trolling motor Skimmer and Pod Installation
The TMB-S trolling motor bracket (Part No. 51-45) is an optional accessory and is available
through LEI Extras at www.lei-extras.com. The TMB-S bracket is used to attach a one-piece
bracket skimmer transducer to a trolling
motor.
The Pod transducer does not need a TMB-S
trolling motor bracket to be installed on a
trolling motor. It only needs a hose clamp
(adjustable strap).
Installing transducer on trolling motor:
1.
Using the components supplied with the TMB-S bracket attach the skimmer
transducer to the bracket as shown
in the diagram.
2.
Slide the adjustable strap (hose
clamp) through the plastic bracket
on the skimmer transducer or
through the Pod transducer slots
and then slip the strap around the
trolling motor.
Adjustable strap
Internal tooth
Bolt
9
Installation
Plastic ties (not
included)
Move transducer
cable to back
side of shaft
washer
Plastic bracket
Lock
nut
Flat washer