Option - Brother BAS-343E Instruction Manual

15. Options

15. Option

•¡ Programmer assy
•¡ Milling device
•¡ WP stitch device
•¡ Auto bobbin changer
•¡ Needle thread presser device
•¡ Thread breakage detector device
•¡ Play prevention work clamp
•¡ Thread wiper the side
•¡ 2-step thread tension device
58
* Refer to the separate Parts Book for details.
BAS-343E
Used to create sewing patterns for the BAS-300E series.
It can also be used to display error messages.
This device can be used to cut a variety of objects such
as grooves, holes, and outline shapes in plastic or alumi-
num sheets.
Increases the stitch creation range for perfect stitches.
When the amount of bobbin thread remaining becomes
low, this device automatically replaces the bobbin. This
reduces the need for tasks such as checking the amount
of bobbin thread remaining and replacing bobbins, so that
productivity can be increased.
This allows the upper thread to be securely placed under
the material for the first stitch at the sewing start.
Available as rotary type or fiber type, stops sewing when
a thread breakage is detected and warns the operator.
This work clamp prevents any play from occurring in the
clamp.
Wipes the upper thread away to the side when an inner
clamping device is being used.
Allows the upper thread tension to be switched between
two settings at any position desired by using the program-
mer.