HP Integrity rx5670 Installation Manual page 56

1 1. In the IP Binding field, enter YES to enable IP Binding or NO to disable IP Binding.
12. In the IP Binding List field, enter the IP address and netmask pairs separated by semicolons. For
example, IPAddress1/Netmask1;IPAddress2/Netmask2.
The masking field is not required for IPv6 addresses.
13. In the Enable IP Restricted Login field, enter YES to enable IP restricted logins or NO to disable IP
restricted logins.
14. In the Enter include IP Addresses, or ranges field, enter the IP addresses or range of IP address to
be included.
15. In the Enter exclude IP Addresses, or ranges field, enter the IP addresses or range of IP address to
be excluded.
16. Click Save to save your configuration, or click Cancel to discard your configuration.
17. Click OK to close the HP ProLiant Linux Deployment Utility screen.
56 Installing HP SMH directly on Linux using Linux Deployment Utility