Patching Or Updating Hp Smh Software - HP Integrity rx5670 Installation Manual

only (nothing listens on port 2381, so that port fails). When it contacts port 2301 (http), then the HP-UX
Apache-based Web Server starts on port 2381 (https), and the page redirects.
Automatic startup on boot
This mode starts HP SMH automatically during system initialization. If the automatic startup on boot
start mode is enabled and the system was rebooted using this configuration, you can access HP SMH
using a web browser and navigating to https://hostname:2381/. Daemons listen on both
http://hostname:2301/ and https://hostname:2381/. If you use port 2301 (http), then the HP-UX
Apache-based Web Server starts on port 2381 (https), and the page automatically redirects.
NOTE:
is possible on an HP-UX operating system only.
Manual startup
You can start HP SMH from the HP-UX CLI.
Configure the startup mode of the HP SMH server and the Tomcat instance using
/opt/hpsmh/bin/smhstartconfig script.
Syntax: smhstartconfig [ -a {on|off} -b {on|off} ] [ -t {on|off} ]
Options:
-a {on|off}
-b {on|off}
-t {on|off}
If you do not specify an option, then smhstartconfig displays the current startup mode. The
smhstartconfig command does not accept -a on and -b on options simultaneously.
For more information, see the smhstartconfig (1M) manpage:
man smhstartconfig or man sam
After changing the autostart mode to "on boot" (with the smhstartconfig -b on -a off command),
you can start the HP-UX Apache-based Web Server processes with the /opt/hpsmh/lbin/hpsmh
start command without rebooting.

Patching or updating HP SMH software

HP might issue patches to HP SMH. You can adopt a proactive patch management strategy and regularly
check the standard patch resources:
IT Resource Center (ITRC) at
Standard HP-UX patch bundles on the OE and Applications media, and the ITRC
For a detailed guide on how to patch your HP-UX operating system, see the Patch Management User Guide
for HP-UX 1 1.x Systems on the HP Technical Documentation website at http://docs.hp.com.
HP might issue software updates to HP SMH. Check the following resources for any notices regarding software
updates:
HP-UX OE media
HP-UX Applications media
HP SMH web page on the Software Depot home at
For autostart URL and automatic startup on boot, you can use http://hostname:2301. This
Enable or disable the autostart URL mode.
Enable or disable the automatic startup on boot mode.
Set the Tomcat startup mode where:
Starts Tomcat when HP SMH starts.
on
Starts Tomcat on demand (default).
off
http://itrc.hp.com
http://www.hp.com/go/softwaredepot
Patching or updating HP SMH software 23