Enter Setup Mode; Exit Setup Mode - RCA RCU811 - Learning Remote User Manual

RCU811US_IB_REVB 9/26/03

Enter Setup Mode

The following are the screen selections available in the Setup Mode.
1. Setup Mode?
2. Set Time Display?
3. Timer 1 Mode?
4. Timer 2 Mode?
5. Timer 3 Mode?
6. Timer 4 Mode?
7. Cancel Timer 1
(Only appears once
Timer 1 has been set.)
8. Cancel Timer 2
(Only appears once
Timer 2 has been set.)
9. Cancel Timer 3
(Only appears once
Timer 3 has been set.)
10. Cancel Timer 4
(Only appears once
Timer 4 has been set.)
11. Learn Mode?
12. Clear Mode?
(Only appears after commands
have been learned.)
13. Reset?
(Master Reset to clear all settings—
return to factory default)
14. Exit

Exit Setup Mode

To exit the Setup Mode at any time and return to normal operation, follow these steps:
1. Press and release the CLEAR key.
The remote is now in normal operation mode.
OR
2. Press and release the SETUP (S) key repeatedly until the
status display shows the Exit Screen. Press and release the
ENTER key. The remote is now in normal operation mode.
During a Setup function, if no key is pressed for 30 seconds, the
unit automatically exits from the Setup mode. The status display
shows the TimeOut Screen for three seconds prior to returning to
normal operation. Any operation that is not completed when the
timeout occurs is not saved.
11:54 AM Page 5
5