List Of Components; Description; Reference Installation Drawing - Panasonic Whisper Wall FV-08WQ1 Installation Instructions Manual

List of components

FV-08WQ1
Part name
Wall sleeve
Screw I (4 x 30)
Mounting plate
Screw II (4 x 6) (for new
construction only)

Description

This Panasonic wall mounted ventilating fan uses a propeller fan driven by a capacitor motor.
The motor is designed for extended service life with reduced energy consumption.
It also incorporates a thermal-cutoff device for safety. The grille is easily detachable from the main unit.

Reference installation drawing

Wall thickness: 114.3 - 152.4 mm (4.5 - 6")
No extension sleeve is used.
Flexible
conduit
Exterior wall
Exterior
hood
Outdoor
Wall sleeve
Wall
thickness
Drawing Quantity
1
4
1
2
When the wall thickness is between 152.4 mm (6") and 254 mm (10"), mount the extension
sleeve as shown below. When the wall thickness is more than 254 mm (10"), prepare an
extension sleeve with an inner diameter of 207 mm (8 5/32") and a length of wall thickness
minus 127 mm (5"), and mount it as shown below. (The seam should be covered with
aluminum tape.)
Interior wall
Junction box
Connector
Main unit
Indoor
2
Part name
Screw III (4 x 8)
Template (Pattern paper)
Exterior hood
Externsion sleeve
Flexible conduit
Exterior wall
Extension
sleeve
Exterior
hood
Outdoor
Wall sleeve
Quantity
Drawing
Interior wall
Junction box
Connector
Main unit
Indoor
Wall
thickness
1
1
1
1