Input Control Command; Cf_Input Command; Cf_Source Command - Sanyo PLC-ET30L - 4200 Lumens Specifications

PLC-ET30L Expand Serial Command Functional Specifications

8.6 Input Control Command

8.6.1 CF_INPUT Command

Command "CF_INPUT_%1" [CR]
"1"------------------------- Select Input 1 (not switching Source)
"2"------------------------- Select Input 2 (not switching Source)
"3"------------------------- Select Input 3 (not switching Source)
"4"------------------------- Select Input 4 (Network viewer)
"UP"---------------------- Increment Input No. by 1
%1
<with PJ-Net attached>Input1→Input2→Input3→Input4→Input1→ - - -
<with PJ-Net unattached>Input1→Input2→Input3→Input1→ - - -
"DN"---------------------- Decrement Input No. by 1
<with PJ-Net attached>Input1→Input2→Input3→Input4→Input1→ - - -
<with PJ-Net unattached>Input1→Input2→Input3→Input1→ - - -
Select Input (Available only in the normal Power ON status)
This command switches only Input No, not Source. For instance, when Input 1
has been selected, receiving the command to select Input 1 does not invoke
souce-switching operation.
Details
button of Projector or Remote Control.
*When selecting Input4 on a projector with PJ-Net unattached, it comes to "103".
*When selecting Input1 on a projector with PJ-Net attached and power OFF, It
comes to "101".
Acceptable
Response
Unacceptable

8.6.2 CF_SOURCE Command

Command "CF_SOURCE_%1" [CR]
Input 1
Input 2
%1
Input 3
Input 4
Select Source of currently selected Input (Available only in the normal Power ON
status)
Details When selected input does not include specified %1, error code "101" is returned and
it is not executed.
When Input No is 4 and PJ-Net power is OFF, error code "101" is returned.
Acceptable
Response
Unacceptable
That means it operates differently from "INPUT"
"000" [CR]
"Error Code" [CR]
"DIGITAL" ----------- Select Digital Input
"ANALOG" ---------- Select Analog Input
"SCART" ------------ Select Scart Input
"HDCP" ------------- Select DVI HDCP Input
"UP" ------ Select in Analog -> Scart -> DVI -> HDCP -> Analog order
"DN" ------ Select in Analog -> HDCP -> DVI -> Scart -> Analog
order
"VIDEO" ------------- Select Composite Video Input
"YPBPR" ------------ Select Y,Pb/Cb,Pr/Cr Input
"YCBCR" ----------- Select Y,Pb/Cb,Pr/Cr Input
"ANALOG" --------- Select RGB
"UP" --- Select in Analog -> Video -> Y,Pb/Cb,Pr/Cr -> Analog order
"DN" --- Select in Analog -> Y,Pb/Cb,Pr/Cr -> Video -> Analog order
"AUTO" -------------- Select Composite Video Input / S-Video Input
automatically. (S-Video has priority)
"VIDEO" ---------------Select Composite Video input
"S-VIDEO" -------------- Select S-Video input
"UP" ------ Select in Auto -> Video -> S-Video -> Auto order
"DN" ------ Select in Auto -> S-Video -> Video -> Auto order
"NETWORK", "UP", "DN"
*Input can not be selected, but above parameter is processed as
Acceptable.
"000" [CR]
"Error Code" [CR]
24/62