Indicators - BenQ W1070 User Manual

Indicators

There are three indicators which show the status of the projector. Check the following for information
about the indicator lights. If there is anything wrong, turn the projector off and contact your dealer.
When the projector is in a normal state
Power Temp
Orange
Green
Flashing
Green
Orange
Flashing
When the projector is in an abnormal state
Power Temp
Off
Off
Red
Red
Flashing
Red Green
Green
Red
Flashing
Green
52 Using the projector
Lamp
Stand-by mode
Off Off
Powering up
Off Off
Normal operation
Off Off
•
Off Off
•
Lamp
Off Red
Red
Off
Flashing
Red Off
Red
Off
Off
Off
Red Off
Status & Description
The projector needs 90 seconds to cool down as it was
abnormally shut down without the normal cooling down
process.
The projector needs to cool for 90 seconds after the power
is turned off.
Status & Description
• The lamp has been damaged. Please contact your local BenQ
customer center for purchasing a new lamp.
• The lamp is not properly attached.
• The lamp has been damaged. Please contact your local BenQ
customer center for purchasing a new lamp.
The fans are not working.
The internal temperature is too high.
• The intake ventilation or the exhaust ventilation is blocked.
• The projector may be in a poorly ventilated location.
• The ambient temperature may be too high.
The projector has shut down
automatically. If you try to re-
start the projector, it will shut
down again. Please contact your
dealer for assistance.