Information Menu - BenQ W1070 User Manual

Reset All Settings
ISF

Information menu

This menu shows you the current operating status of the projector.
Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments
are not shown on the screen.
Function
Source
Preset Mode
Resolution
Color System
Equivalent Lamp
Hour
3D Format
Firmware Version
46 Using the projector
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Language, Projector
Position, High Altitude Mode, Password, Key Lock, and ISF.
The ISF calibration menu is password protected and only accessible by
authorized ISF calibrators. The ISF (Imaging Science Foundation) has developed
carefully crafted, industry-recognized standards for optimal video performance
and has implemented a training program for technicians and installers to use
these standards to obtain optimal picture quality from BenQ video display
devices. Accordingly, we recommend that setup and calibration be performed
by an ISF certified installation technician.
For more information, please go to www.imagingscience.com or
contact the place you purchased the projector.
Shows the current signal source.
Shows the selected mode in the Picture > Preset Mode menu.
Shows the native resolution of the input source.
Shows input system format: NTSC, PAL, SECAM, YUV, or RGB.
Shows the total lamp time used.
Shows the current 3D mode.
3D Format is only available when 3D Mode is enabled.
Shows the firmware version of your projector.
Description