Selecting An Input Signal - Hitachi CP-RX80 - XGA LCD Projector User Manual

Operating

Selecting an input signal

1.
Press INPUT button on the projector.
Each time you press the button, the projector switches its
input port from the current port as below.
COMPUTER IN  S-VIDEO  VIDEO
● While ON is selected for AUTO SEARCH item in OPTION
menu (42), the projector will keep checking the ports in
above order repeatedly till an input signal is detected.
1.
Press COMPUTER button on the remote control to select
the COMPUTER IN port.
1.
Press VIDEO button on the remote control.
Each time you press the button, the projector switches its
input port from the current port as below.
S-VIDEO
ó
● While ON is selected for AUTO SEARCH item in OPTION
menu, the projector will keep checking every port sequentially
till an input signal is detected (42). If VIDEO button is
pressed when COMPUTER IN port is selected, the projector
will check S-VIDEO port first.
1.
Press the MY SOURCE / DOC. CAMERA button on
the remote control. The input signal will be changed
into the signal you set as MY SOURCE (44).
● This function also can use for document camera. Select
the input port that connected the document camera.
16
VIDEO
INPUT button
COMPUTER button
MY SOURCE/
COMPUTER
VIDEO DOC.CAMERA
ASPECT AUTO SEARCH
FREEZE PAGE
MAGNIFY
UP
ON
DOWN
OFF
KEYSTONE
MY BUTTON
1 2
VIDEO button
POSITION
ENTER
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ESC
ASPECT AUTO SEARCH
MAGNIFY FREEZE PAGE
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON
1 2
POSITION
MY SOURCE /
ENTER
DOC. CAMERA button
ESC
MY SOURCE/
COMPUTER
VIDEO DOC.CAMERA
ASPECT AUTO SEARCH
FREEZE PAGE
MAGNIFY
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON
1 2
POSITION
ENTER
ESC
BLANK
VOLUME
MUTE
MENU
RESET
BLANK
VOLUME
MUTE
MENU
RESET
BLANK
VOLUME
MUTE
MENU
RESET