Operating
Adjusting the volume
1.
Use the VOLUME +/VOLUME - buttons to adjust the volume.
A dialog will appear on the screen to aid you in adjusting the
volume. If you do not do anything, the dialog will automatically
disappear after a few seconds.
● When
is selected for current picture input port, the volume
adjustment is disabled. Please see AUDIO SOURCE item of
AUDIO menu (36).
● When the projector is in the standby mode, the volume can be
adjusted if
selected to the STANDBY MODE in the SETUP menu (35).
Temporarily muting the sound
1.
Press MUTE button on the remote control.
A dialog will appear on the screen indicating that you have
muted the sound.
To restore the sound, press the MUTE, VOLUME + or
VOLUME - button. Even if you do not do anything, the dialog
will automatically disappear after a few seconds.
● When
is selected for current picture input port, the sound
is always muted. Please see AUDIO SOURCE item of
AUDIO menu (36).
● C.C. (Closed Caption) is automatically activated when sound is muted and an
input signal containing C.C is received. This function is available only when
the signal is NTSC for VIDEO or S-VIDEO, or 480i@60 for COMPUTER
IN, and when AUTO is selected for DISPLAY in the C.C. menu under the
SCREEN menu (41).
is not selected for the AUDIO OUT STANDBY and NORMAL is
Operating
VOLUME +/- button
MY SOURCE/
VIDEO
COMPUTER
DOC.CAMERA
AUTO
ASPECT
SEARCH
BLANK
PAGE
VOLUME
MAGNIFY
FREEZE
UP
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
1
2
MENU
POSITION
ENTER
RESET
ESC
MUTE button
MY SOURCE/
VIDEO
COMPUTER
DOC.CAMERA
ASPECT
AUTO
SEARCH
BLANK
MAGNIFY
FREEZE
PAGE
VOLUME
UP
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
1
2
POSITION
MENU
ENTER
ESC
RESET
15