Operation Requirements - Canon LV-8320 Specifications

6.4. Operation Requirements

When the projector's status is any of below, Functional Execution Commands are limited.
Projector Status
In Standby
Countdown in process
Cooling Down in process
Cooling Down
Temperature
Abnormal Temperature Status
Abnormal Power Status
Power Save / Cooling Down in process
Power Save Status
Auto input On1/On2 setting
Note) When the status is as above, even if the projector receives other commands,
it returns [ACK] [CR].
C00 POWER ON
C00 POWER ON → Countdown is terminated
C01 POWER OFF
C02 POWER OFF → Countdown is terminated
NONE (No Execution)
due to Abnormal
NONE (No Execution)
NONE (No Execution)
NONE (No Execution)
NONE (No Execution)
C00 POWER ON
C01 POWER OFF
Although transmit Input source commands, Auto
input does not operate.
-8-
LV-8320 Basic Serial Command Specifications
Available Functional Execution Commands