Operation Requirements; Power On Command; Power Off Command (Quick Power Off); Power Off Command - Canon LV S3 - SVGA LCD Projector Specification

7.4 Operation Requirements

When the projector's status in this below, functional execution commands are limited.
Status Read Commands are available even in this table status.
Projector Status
StandBy Mode
Processing Countdown
Processing Cooling Down
Processing Cooling Down due to abnormal
temperature.
Abnormal Temperature Status
Processing Mode Change
Processing Power Save/Cooling Down
Processing Power Save
Note) When the status is above, even if the projector receives other command in the above
status, the projector returns [ACK] [CR].

7.5 Power ON Command

Command "C00" [CR]
Power ON
When already Power ON, no need to do.
Detail
When sending this command during processing Count Down, Count Down is
terminated.
Acceptable
Response
Unacceptable
7.6 Power OFF Command•iQuick Power OFF•j
Command "C01" [CR]
Power OFF (Stand By)
When Power OFF with ON-OFF button of the projector or the remote control,
Detail
"Power OFF" will be displayed. However, as soon as this command is sent,
Quick Power OFF is executed.
Acceptable
Response
Unacceptable

7.7 Power OFF Command

Command "C02" [CR]
Power OFF (Stand By)
When Power OFF with ON-OFF button of the projector or the remote control,
Detail
"Power OFF" will be displayed. However, as soon as this command is sent,
Power OFF is executed.
Acceptable
Response
Unacceptable
Available Functional Execution Commands
C00: Power ON
C00: Power ON
(Terminate Countdown)
N/A
N/A
N/A
N/A
N/A
C00: Power ON
C01: Power OFF
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
Page 8/21