Planning Information; Warranty - Thermador WD27JS Specifications

MODEL OPTIONS
Thermador Warming Drawers are available in 27-inch,
30-inch and 36-inch widths to fi t your kitchen plans
perfectly. There are two series to choose from —
Professional and Masterpiece . Each series features
®
a distinctive style. You may choose from traditional
warming drawers or convection warming drawers.
The warming drawers featured in this guide include
the front panel — you no longer need to purchase front
panels separately. Additionally, Thermador Convection
Warming Drawer units may be installed with your own
custom front panel. Additionally they are available with
Masterpiece or Professional design handle. Be sure
to reference the correct model information in this
design guide.
INSTALLATION CONSIDERATIONS
The information in this design guide provides key
features, product dimensions, cutouts and installation
specifi cations. Before installing a Thermador Warming
Drawer, be sure to verify the cabinet dimensions
and electrical connections. Also, always consult with
the installation manual packed with the product for
complete details before installing.
Thermador Warming Drawers may be installed
below any Thermador Single or Double Built-in Oven.
A minimum space of 1" is recommended between the
bottom of the oven and the top of the warming drawer.
Refer to the built-in oven section for additional details.
Thermador Warming Drawers may also be installed
below any Thermador Electric or Non-professional Gas
Cooktop as long as there is no contact between the
bottom of the cooktop and the top of the warming
drawer. When installing below a Thermador Induction
Cooktop, a minimum 1" air gap must be maintained
between the bottom of the cooktop and the top of the
warming drawer. When installing below a Thermador
Professional Rangetop, a minimum 2
be maintained between the bottom of the cooktop and
the top of the warming drawer. Refer to the appropriate
cooktop or rangetop section for additional details.

WARRANTY

Limited warranty parts and labor (2 year).
See page 308 for additional warranty details.
1.800.735.4328 | THERMADOR.COM 1.800.735.4328 | THERMADOR.COM
ELECTRICAL SPECIFICATIONS
Be sure your appliance is properly installed and grounded by a qualifi ed
technician. Installation, electrical connections and grounding must comply
with all applicable local codes.
All Thermador Warming Drawers are designed to be connected to a 120V
AC, 60 Hz, 3-wire, grounded outlet.
MODEL
WD27JS
WD30JS
WD30JP
WDC30JS
WDC30JP
WDC30J
WDC36JP
WDC36J
ELECTRICAL LOCATION
The outlet can be installed in the back wall directly behind the drawer.
/ " air gap must
3
4
WARMING DRAWERS

PLANNING INFORMATION

REQUIRED CIRCUIT BREAKER
120V, 60Hz
15 Amp
15 Amp
15 Amp
15 Amp
15 Amp
15 Amp
15 Amp
15 Amp
193