Planning Information; Warranty - Thermador WD27ES Specifications

MODEL OPTIONS
Thermador Warming Drawers are available in 27-inch,
30-inch and 36-inch widths to t your kitchen plans
perfectly. There are two series to choose from—
Professional and Masterpiece®. Each series features
a distinctive style. You may choose from traditional
warming drawers or convection warming drawers.
Convection warming drawer units may be installed
with your own custom front panel or with one of our
coordinating front panels. Be sure to reference the
correct model information in this design guide.
INSTALLATION CONSIDERATIONS
The information in this design guide provides key
features, product dimensions, cutouts and installation
speci cations. Before installing a Thermador Warming
Drawer, be sure to verify the cabinet dimensions
and electrical connections. Also, always consult with
the installation manual packed with the product for
complete details before installing.
Thermador Warming Drawers may be installed below
any Thermador Single or Double Built-in Oven. A
minimum space of 1" is recommended between the
bottom of the oven and the top of the warming drawer.
Refer to the built-in oven section for additional details.
Thermador Warming Drawers may also be installed
below any Thermador Electric or Non-professional Gas
Cooktop as long as there is no contact between the
bottom of the cooktop and the top of the warming
drawer. When installing below a Thermador Induction
Cooktop, a minimum 1" air gap must be maintained
between the bottom of the cooktop and the top of the
warming drawer. When installing below a Thermador
Professional Rangetop, a minimum 2
be maintained between the bottom of the cooktop
and the top of the warming drawer. Refer to the
appropriate cooktop or rangetop section for
additional details.

WARRANTY

Limited warranty parts and labor (1 year)
See page 294 for additional warranty details.
ELECTRICAL SPECIFICATIONS
Be sure your appliance is properly installed and grounded by a quali ed
technician. Installation, electrical connections and grounding must comply
with all applicable local codes.
All Thermador Warming Drawers are designed to be connected to a 120V AC,
60 Hz, three-prong, grounded outlet.
MODEL
WD27ES
WD30ES
WD30EP
WDC30E
WDC36E
ELECTRICAL LOCATION
The outlet can be installed in the backwall directly behind the drawer.
3 / " air gap must
4
1.800.735.4328 | THERMADOR.COM
WARMING DRAWERS
REQUIRED CIRCUIT BREAkER

PLANNING INFORMATION

120V, 60Hz
15 Amp
15 Amp
15 Amp
15 Amp
15 Amp
191